Most of us have at least once felt startled when receiving a dramatic increasing electricity bill. The cause of this rising bill might be because of one of the three devices below. Read on to learn how to use your appliances efficiently to save electricity in your home.
Electric water heater
During the usage, lots of people often forget to turn off the heater, which will consume a significant amount of electricity. The capacity of a direct water heater is usually about 3500W to 4500W, while the indirect one is about 2500W.
This means that when the highest capacity is reached, the water heater will consume about 2 units per hour and can be to 20 units in a day. Therefore, you should pay attention to turn off the heater when it reaches the appropriate temperature to avoid wasting electricity and ensure safety while bathing.
Air condition
Air condition should not be set on too low temperature
As the Earth is getting hotter and hotter, the usage of air conditioners is, as a result, getting more frequent. Most types of air conditioners on the current market have a capacity of about 2,600W, which is much higher than many other appliances in the family and is also the most "energy-hungry" device. You should choose the automatic mode in order to adjust the most comfortable temperature while conserving the energy.
Not many people know that without a direct circuit breaker (CB for short), the air conditioner will still work silently and consume the electricity with the standby capacity of about 1.11W. Although the number is insignificant, it still consumes a lot of electricity if we set up the standby mode for a long time.
Electric stoves
To ensure residential safety, the usage of gas stoves are now strictly forbidden in many apartments. Instead of that, induction stoves or infrared stoves are used. For families who prefer home-cooking, this will definitely consume a significant amount of electricity. Different types of electric stoves always have a standby mode that consumes about 0.86W. Therefore, the stoves should be unplugged to ensure safety as well as save energy.
These are the 3 "energy-wasting" appliances that are available in most of nowadays households, therefore knowing the efficient usage of these devices is very important. Note that electrical devices should be turned off or unplugged after using not only save your energy but also ensure your family safety. Besides energy-saving, usage safety is also necessary. Tran Phu Electric and Mechanical specializing provide customers with prestigious-quality electric wire and cable products.
CONTACT INFORMATION:
Tran Phu Electric Mechanical Joint Stock Company
Address: No. 41, Phuong Liet Str., Phuong Liet Ward, Thanh Xuan Dist., Hanoi.
Hotline: 0898.41.41.41
Email: contact@tranphu.vn
Website: www.tranphu.com.vn